Mining Full Body Harnesses
Product Details：
- Dimensions: S-XL (Universal Size)
- Webbing width: Ø 45mm ± 1mm
- Material: Webbing – 100% High-strength PES
- Hardware: Alloy Steel
- Static Strength: 22 KN/3min
- Dynamic Performance: < 6 KN
- Certifed to: EN361, EN358, CE, ANSI
- Note: Custom color, labeling, branding, packaging, and OEM options available for all products.
Full Body Harnesses Features
Full‑Range Padded Comfort System
Full‑set padding design, optimized for long‑hours suspended work scenario.
1. Padded shoulder pads：Orange‑trimmed shoulder foam cushioning, relieve shoulder pressure during long‑time wearing.
2. Wide thick foam‑padded waist belt：Large‑area padded waist support, disperse suspension pressure, greatly improve comfort during long‑duration suspended work.
3. Padded thigh loops：Thick cushion on leg straps, avoid leg strangulation injury under long‑time suspension.
Multi‑Anchor‑Point Configuration
Safety Note：Side D‑rings only for work‑positioning, cannot be used for fall‑arrest.
- > Rear Back D‑ring：Dedicated fall‑arrest anchor point (EN361). Connect shock‑absorbing lanyard / self‑retracting lifeline for fall‑arrest protection.
- > Dual Side Waist D‑rings：Mounted on padded waist belt, EN358 work‑positioning standard. Connect positioning lanyards for hands‑free suspended operation.
High‑Strength Webbing & Craftsmanship
– High‑tenacity industrial polyester webbing, red‑black high‑visibility color scheme.
– All key load‑bearing joints adopt multi‑layer reinforced stitching, excellent wear‑resistance against mine dust, grit and sharp objects.
– Metal alloy hardware: anti‑corrosion, rust‑proof, suitable for humid, dusty open‑pit & underground mine environment.
Full‑adjustment Quick‑fit Structure
– Adjustable shoulder straps, waist belt, thigh straps. Flexible fit for operators with different body shapes.
– Quick‑release buckle design, fast donning and doffing on‑site mining operation.
– Tool loops reserved on waist belt：can hang small mining tools, convenient for maintenance work.
Faq's
Full Body Harness Size Chart
Precautions for use
PRECAUTIONS FOR USE
If a person falls suddenly, the free‑fall distance shall not exceed 2 meters.
✔ Harness: High‑Anchor, Low‑Work Position
✘ FORBIDDEN: Low‑Anchor, High‑Work Position
Function of the energy‑absorbing lanyard pack:
Upon a fall incident, the pack tears open and the internal webbing extends to absorb impact energy.
This energy‑absorbing pack is single‑use only and cannot be reused.
When using a safety harness with energy‑absorbing lanyard, the clearance distance from anchor point to ground shall be no less than 7 meters. Insufficient clearance will result in ground impact.
Note!: Protecting against falling risks is GREX®’s top priority!
It is necessary to receive adequate training (knowledge of techniques and security measures) before using the tools. Incorrect use or improper maintenance could lead to serious accidents even fatal. Please read carefully or learn enough knowledge before use.
How to wear a Harnesses correctly
1. Hold the harness by the Dorsal D-ring and shake it
Holding the harness by the Dorsal D-ring and gently shaking it will let the straps fall into the right place, making the putting on process easier.
2. Undo the buckles and release the straps
If the chest or the leg straps came in buckled conditions, unbuckle them and release the tension on the straps.
3. Slips the strap over your shoulder and adjust the fit
Ensure the Dorsal D-ring is placed in the middle of the back, in between of the shoulder blades.
4. Connect the leg straps
The chest straps should fit snuggly and keeping the body harness to remain in place.
5. Connect the chest straps
The chest straps should fit snuggly and keeping the body harness to remain in place.
6. Adjust the straps so the harness fit snuggly but still allows a full range of motion
When the leg straps are buckled, it should fit snuggly without impacting you to stand straight.
Important Notes：
Before putting on the full-body harness, please note the following three points:
1. Check the harness for damage, such as frayed or loose threads, cracks in the webbing, or foreign objects adhering to it.
2. Ensure that the metal buckles and D-rings are free from cracks or deformation.
3. Once you put on the harness, always tuck the loose ends of the straps into the strap’s retainers.
Is harness inspection important?
We cannot stress enough that using the right equipment when working at height could save your life one day, so it’s vitally important that users are trained to inspection components such as a harness correctly.
Pre-use checks need to be carried out before each use and include the following physical inspections:
- Check the label – make sure that the label has an individual serial number, with valid inspection and manufacturing dates.
- Anchor (Sternal/Dorsal etc..) – Check the condition of the D Ring for any signs of distortion, fatigue/rust, cracking, burrs, nicks, excessive wear. Make sure the ring pivots freely.
- Webbing – Check for signs of UV damage and chemical damage (staining is an indication of chemical damage which can be identified if the harness appears brittle or hardened). Webbing must be free from cracks, cuts, fraying or excessive abrasion, even loose stitching or fading may mean the fibre structure has been compromised.
- Buckles – Connect buckles ensuring the harness isn’t distorted and hangs correctly, making sure all rivets are tight and the buckles aren’t chipped or bent, with stitching intact.
- Loops – Check for damaged, cracked or broken loops.
- Straps – Inspect the clips on the straps and check for any loose stitching. Carefully check the straps for any visible signs of fraying or broken fibres.
